1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system

1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
Name
HDPE septic tank
Material
PE100
Place of Origin
China
Size
1.0,1.5,2.0,2.5 m³
Colors
black
Service Life
Over 50 years
Payment items
T/T L/C
Port
Qingdao
Payment
30% ADVANCE PAYMENT AND THE 70% BALANCE PAYMENT BEFORE THE SHIPEMNT
Plastic septic tank is a basic facility for storing and treating sewage in our daily life. HAILI is processed with environmentally friendly plastic raw materials. The durability of the product can be as long as 50 years, which is longer than that of brick septic tank. many.

Advantages and characteristics of plastic septic tanks:

1. The double-layer thickening design of the plastic septic tank is not easy to leak.

2. The product is simple to operate, easy to install, and requires no manual maintenance in the later stage.

3. It occupies a small area and adopts the buried type, which does not occupy the space on the ground.

4. The construction period is short, which can save the installation cost and labor cost for the enterprise.

5. The price of the product is affordable, the economic performance is excellent, and the cost is lower than the traditional septic tank.

6. The plastic septic tank can hold various chemical sewage and medical wastewater, and is resistant to various chemicals such as acid, alkali and salt.

Plastic septic tanks are widely used:

Plastic septic tanks have many product advantages and a wide range of applications, suitable for large factories, hospitals, schools, industrial parks and many other places.

The plastic septic tank can ensure the sanitation of the living environment and avoid the pollution of the environment by sewage discharge. In the process of sewage purification, the product can not only discharge the sewage up to the standard, but also decompose the sludge and anaerobic decompose into organic sludge, which can be Used as fertilizer for crops.

During the treatment process, the plastic septic tank can kill mosquitoes and fly eggs and reduce the harm caused by mosquitoes to the living environment.

The simple use of plastic septic tanks:

The plastic septic tank adopts blow molding, the production process is simple, and the manufacturer can produce it in large quantities in a short period of time.

The product is light in texture, easy to transport, and has a short installation period. The construction personnel install it by lifting type. During the installation process, the company has technicians to guide the operation on site. After installation, the inspection can be put into use.

The plastic septic tank does not need maintenance in the later stage, saving labor and material resources, and the product can be cleaned regularly after a period of use.


Advantages of PE septic tanks

The polyethylene PE plastic septic tank is made of high-strength polyethylene PE raw materials through rotational molding. It is formed in one time, without seams, with good overall sealing performance, non-toxic, odorless, non-polluting, acid and alkali resistance, corrosion resistance, Durable and economical, normal use can reach more than 50 years. The sewage treatment effect is good, and the brick septic tank is not suitable for acid and alkaline conditions and the leakage problem is eliminated.

1.0 cubic meter PE septic water tank

pe-septic-tank (2).webp

Usual number of people available: 3-5 peoples

Wall Thickness: 4mm/5mm

Caliber: 400*315*315mm

Weight: 40.8 KG

Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

1.5 cubic meter PE septic water tank

pe-septic-tank (3).webp

Usual number of people available: 6-8 peoples

Wall Thickness: 4mm/5mm

Caliber: 400*315*315mm

Weight: 53-56 KG

Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

2.0 cubic meter PE septic water tank

pe-septic-tank (4).webp

Usual number of people available: 13-15 peoples

Wall Thickness: 7mm

Measure: 2355*1210*1165mm

Caliber: 400*315*315mm

Weight: 93-96 KG

Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

2.5 cubic meter PE septic water tank

pe-septic-tank (5).webp

Usual number of people available: 13-15 peoples

Wall Thickness: 7mm

Measure: 2760*1220*1200mm

Caliber: 400*315*315mm

Weight: 110 KG

Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

Composition of PE plastic septic tank

The main function and function of the precipitation and decay area is to precipitate the domestic sewage to remove the coarse substances that can be precipitated in the wastewater. At the same time, the wastewater performs septic action here. Circulate the water, produce more microorganisms, decompose and devour the sewage. The filter treatment area, whose function is to further treat the sewage in this area. Converting COD in sewage into harmless inorganic substances is a key component of the device.

pe-septic-tank (10).webp

PE plastic septic tank installation instructions

Excavate a rectangular pit according to the size of the septic tank, and use 50mm concrete as the cushion. Lay the three-compartment septic tank flat, connect the sliding manure pipe and the exhaust pipe, and the exhaust pipe should be 20-50cm higher than the toilet room. The backfill soil is preferably semi-dry and semi-wet, compacted layer by layer, and backfilled layer by layer until the ground is level to prevent the septic tank from collapsing and tilting. Filling should be carried out in two steps: backfill half to a depth of 0.6m, sprinkle a small amount of water to tamp and level, and then fill the soil again until the surface is level. The top two outlets are 5-10cm above the ground, and cement mortar is used around the outlet cover to play a role in impermeability and fixation. The installation should be parallel to the left and right, and the longitudinal direction should be high in the front and low in the back (5° inclination) to ensure that no water is left after flushing. The distance between the rear end and the wall should be between 20-25cm, and an external insulation layer should be added in cold areas. The surrounding area of the squatting pan is first tamped with fine sand, and then leveled with 2 cm cement mortar. The water outlet pipe of the water storage bucket must be installed naturally, and it is not suitable for S-shaped laying to prevent the water from freezing. The water storage bucket should be placed on the back side. When the indoor water storage bucket is installed, the bucket cover is 10cm below the ground, and the bucket cover can be covered with thermal insulation material. When backfilling the soil, the water storage bucket should be filled with water first, and then the soil should be compacted.


Send a Message

If you want to ask anything just fill in the form below and send us.

Name: Robert JImi        time:2022-08-29 10:52:17
We are from the Philippines and we provide products and engineering services to municipalities. We purchase PE plastic septic tanks for a long time. haili is a PE factory and the plastic products provided are fantastic.

Write a review

// Our Pipe //

Featured Pipe Products

250 Gallon Septic Tank
250 Gallon Septic Tank

A septic tank is an underground wastewater treatment system that is commonly used in areas where tra...

750 Gallon Septic Tank
750 Gallon Septic Tank

750 gallon Septic tanks, as domestic sewage pretreatment structures, play a role in protecting the e...

1500-gallon 3 compartment septic tank
1500-gallon 3 compartment septic tank

1500-gallon 3 compartment septic tank is a specification commonly used in communities, hospitals, sc...

PE Sewer Septic Tank Specification
PE Sewer Septic Tank Specification

A septic tank is a small sewage treatment system for some buildings that are not connected to a publ...

// Our Pipe //

New Fusion Machine

Hot Melt Plastic Welding Machine in Nepal
Hot Melt Plastic Welding Machine in Nepal

Plastic welding machines are becoming increasingly popular in Nepal due to the growing demand for du...

PPR Welder Machine in India Comprehensive Guide
PPR Welder Machine in India Comprehensive Guide

Are you searching for the perfect PPR welder machine to add to your workshop? Purchasing the right w...

Plastic pipe welding machine price in pakistan
Plastic pipe welding machine price in pakistan

If you are from Pakistan and are ready to understand the performance and price of Plastic pipe weldi...

Plumber butt fusion welding tools 2in' to 4in' machine price list
Plumber butt fusion welding tools 2in' to 4in' machine price list

The manual butt fusion welding machine is used to weld the inner and outer ends of galvanized pipes....

// Our Pipe //

New Pipe Products

Aluminum Alloy Plastic Lined Composite Pipe
Aluminum Alloy Plastic Lined Composite Pipe

Aluminum alloy lined plastic composite pipe is a new type of practical pipe developed on the basis o...

ABS Water Outlet
ABS Water Outlet

ABS water outlets have become an ideal choice in water supply systems because of their corrosion res...

2 inch plastic water pipe roll
2 inch plastic water pipe roll

A 2-inch plastic water pipe roll refers to a type of flexible tubing made from plastic, typically hi...

PERT Ⅱ Heat Resistant Insulation Pipe
PERT Ⅱ Heat Resistant Insulation Pipe

Polyurethane prefabricated directly buried insulation pipe, full name: high-density polyethylene out...