You all need to know about Water supply and distribution system
You all need to know about Water supply and distribution system

10/17/2022

The pipeline system for delivering and distributing water to users in a water supply project is also called a water supply network. It inclu...

HDPE Double wall vs Single wall corrugated pipe
HDPE Double wall vs Single wall corrugated pipe

10/14/2022

Single-wall corrugated pipe: The inner and outer surfaces are corrugated.
Double wall corrugated pipe: the inner surface (inner wall) is sm...

The under pressure drilling tech and gas pipe hot tapping fittings
The under pressure drilling tech and gas pipe hot tapping fittings

10/12/2022

The purpose of under-pressure drilling is to add construction techniques such as bypass and tee to the pipeline without stopping production ...

Types of valves and valve classification in water drainage system
Types of valves and valve classification in water drainage system

10/06/2022

​Valves have a wide range of uses and types, and the classification difficulty of valves is also increasing. In order to better understand v...

The injection molding process of mpp electric conduit pipe
The injection molding process of mpp electric conduit pipe

10/06/2022

In order to fully achieve the use efficiency and ensure the quality of the mpp power tube in the production process, many different producti...

The key production common sense of PVC
The key production common sense of PVC

09/16/2022

PVC, the full name is Polyvinylchloride, the main component is polyvinyl chloride, and other components are added to enhance its heat resist...

PPR vs PE:Why PPR pipes can become the main household water pipes?
PPR vs PE:Why PPR pipes can become the main household water pipes?

09/16/2022

PE pipe and PPR pipe are two kinds of pipes. Different from PVC pipe used for household water drainage, both PE pipe and PPR pipe can be use...

Antifreeze and heat preservation measures for PE pipes in winter
Antifreeze and heat preservation measures for PE pipes in winter

09/14/2022

Generally speaking, substances follow the law of thermal expansion and contraction. However, for water, it has a certain temperature premise...

The reason why the PE water supply pipe will burst
The reason why the PE water supply pipe will burst

09/13/2022

At this stage, plastic pipes have developed vigorously, and PE pipes, PP-R pipes, and UPVC pipes have all taken a foothold. Among them, the ...

The key production common sense of PVC
The key production common sense of PVC

08/22/2022

Basic raw materials of PVC Resin Calcium powder Stabilizer Lubricant Modifier.Process flow from raw materials to finished products Mixing - ...

How to remove PE mining sewer pipe
How to remove PE mining sewer pipe

08/15/2022

Due to the extreme environment in contemporary mine work, the usual pipes cannot be used for the water delivery work in the mine, while the ...

What you should know about PVC pipe install
What you should know about PVC pipe install

08/09/2022

When the small-diameter pipe is glued by solvent, the socket must be rounded to form a groove, and the fracture surface should be flat and t...

Matters needing attention in PE pipe construction
Matters needing attention in PE pipe construction

08/05/2022

1. Usually in a humid and cold environment, germs are very easy to grow, and an environment with sun is very easy to produce algae. We can a...

Fusion steps of PE water supply pipe
Fusion steps of PE water supply pipe

08/04/2022

PE water supply pipe is made of special polyethylene as raw material and extruded by a plastic extruder at one time. It is used in urban wat...

Maintenance of PE pipes
Maintenance of PE pipes

08/02/2022

​With the rapid development trend of the PE pipe industry, the quality of the pipeline is also improving. The PE pipe has also been quickly ...

Plastic Pipe Socket Welding different between PE Socket Electrofusion
Plastic Pipe Socket Welding different between PE Socket Electrofusion

07/29/2022

Socket connection: Insert the socket of the socket-type pipe into the socket, fill the gap between the socket and the socket, and connect th...

what is SDR 11,how to describe a plastic pipe
what is SDR 11,how to describe a plastic pipe

07/26/2022

Pipes are the most common material in construction electromechanical professions, with different materials and diameters, and the marking of...

Different fusion method of plastic pipes
Different fusion method of plastic pipes

07/25/2022

With the expansion of the application of plastic pipes, the varieties of plastic pipes are also increasing. Now in addition to ordinary PVC ...