HDPE EQUAL 135° ELBOWS PIPE FITTINGS: A Comprehensive Guide

HDPE EQUAL 135° ELBOWS PIPE FITTINGS: A Comprehensive Guide
HDPE EQUAL 135° ELBOWS PIPE FITTINGS: A Comprehensive Guide
Name
135° ELBOW
Material
HDPE
Pressure Rating
1.0MPa, 1.6MPa, 2.0MPa
Place of Origin
China
Size
20mm ~ 800mm
Colors
Black
Service Life
Over 50 years
Temperature
under 70 ℃
Payment items
T/T L/C
Port
Qingdao
Payment
30% ADVANCE PAYMENT AND THE 70% BALANCE PAYMENT BEFORE THE SHIPEMNT
HDPE equal 135° elbows pipe fittings are essential components of any piping system, providing flexible connections between two pipes, valves, and other fittings. These fittings are designed with a particular angle, as the name implies, to ensure the proper flow of fluids through the system. Not only are these fittings highly efficient, but they are also reliable, cost-effective, and durable, making them a great choice for any piping system. In this comprehensive guide, we'll discuss the various features and benefits of HDPE equal 135° elbows pipe fittings, as well as their installation and maintenance tips. With the knowledge acquired here, you'll be able to find the best pipe fitting solution for your specific needs. So read on to learn more about HDPE equal 135° elbows pipe fittings!

What are HDPE equal 135° elbows pipe fittings?

HDPE equal 135° elbows pipe fittings are elbow fittings made from HDPE (high density polyethylene). These fittings are used between two pipes to provide flexibility in the system and maximize flow. They are available in various sizes and are available both with and without rubber seals. The basic design of an equal 135° elbow pipe fitting consists of a straight portion and a curved section. The straight portion has an inside diameter (ID) of 135mm and an outside diameter (OD) of 100mm, while the curved section is at 45° and has an ID of 180mm and an OD of 144mm. While these fittings are specifically designed for use with HDPE pipes, they can also be used with polyethylene, polypropylene, or other types of pipes.

butt-fusion-pipe-fittings-3.webp

Key features of HDPE equal 135° elbows pipe fittings

  • Optimized flow - The flow-optimizing design of equal 135° elbows pipe fittings is highlighted by the ID and OD values. The straight section has an ID of 135mm, allowing fluids to flow easily through the piping system without resistance. At the same time, the curved section has an OD of 144mm, which creates a proper seal with the pipe. The precise measurements ensure the flow of fluids is maximized.

  • Durable construction - The HDPE material used to make the fittings ensures reliable performance and long life over time. The material is also rust-resistant and has a non-corrosive property, which makes it ideal for wet environments. The rubber seals included with the fittings also ensure a water-tight seal, protecting the other components in the piping system from water intrusion.

  • Versatile design - Equal 135° elbows pipe fittings are available in two styles: male adapter and female adapter. The male adapter is used between two pipes or fittings with an ID of 135mm or less, while the female adapter is used with an ID of 180mm or more. This versatile design allows you to create a smooth connection between different pipes in a system.

  • Various sizes - Equal 135° elbows pipe fittings are available in various sizes, allowing you to create connections between almost any size of pipes. They are also available in a variety of seal types, including standard and thread seal.

  • Easy to install - The low-friction design of equal 135° elbows pipe fittings makes them easy to install. Unlike other pipe fittings, these do not require a mandrel, making them suitable for installations with tight spaces.

butt-fusion-pipe-fittings-6.webp

Benefits of using HDPE equal 135° elbows pipe fittings

  • Durable construction - The HDPE material used to make equal 135° elbows pipe fittings is impact-resistant, rust-resistant, and has a non-corrosive property, which makes them suitable for use in wet environments. The rubber seals included with these fittings also ensure a water-tight seal, protecting the other components in the piping system from water intrusion.

  • Optimized flow - The flow-optimizing design of equal 135° elbows pipe fittings is highlighted by the ID and OD values. The straight section has an ID of 135mm, allowing fluids to flow easily through the piping system without resistance. At the same time, the curved section has an OD of 144mm, which creates a proper seal with the pipe. The precise measurements ensure the flow of fluids is maximized.

  • Versatile design - Equal 135° elbows pipe fittings are available in two styles: male adapter and female adapter. The male adapter is used between two pipes or fittings with an ID of 135mm or less, while the female adapter is used with an ID of 180mm or more. This versatile design allows you to create a smooth connection between different pipes in a system.

  • Various sizes - Equal 135° elbows pipe fittings are available in various sizes, allowing you to create connections between almost any size of pipes. They are also available in a variety of seal types, including standard and thread seal.

  • Easy to install - The low-friction design of equal 135° elbows pipe fittings makes them easy to install. Unlike other pipe fittings, these do not require a mandrel, making them suitable for installations with tight spaces.

butt-fusion-pipe-fittings-7.webp

Installation and maintenance tips for HDPE equal 135° elbows pipe fittings

  • Use a pipe thread sealant for a water-tight seal.

  • Use approved pipe fitting tools for an easier installation.

  • Apply grease to the internal O-ring for improved seal performance.

  • Make sure the fitting is installed properly. If there are any abnormalities, check the pipe and if required, remove the fitting and reinstall it correctly.

  • Always use thawing pipe when installing fittings.

  • Prevent corrosion by wiping the fitting with a dry cloth when there is condensation.

  • Store the fitting properly. If you store the fitting in a cabinet, ensure the cabinet door is shut to prevent dust from entering the cabinet.


Conclusion

HDPE equal 135° elbows pipe fittings are essential components of any piping system, providing flexible connections between two pipes, valves, and other fittings. These fittings are designed with a particular angle, as the name implies, to ensure the proper flow of fluids through the system. Not only are these fittings highly efficient, but they are also reliable, cost-effective, and durable, making them a great choice for any piping system. In this comprehensive guide, we'll discuss the various features and benefits of HDPE equal 135° elbows pipe fittings, as well as their installation and maintenance tips. With the knowledge acquired here, you'll be able to find the best pipe fitting solution for your specific needs. So read on to learn more about equal 135° elbows pipe fittings!


Send a Message

If you want to ask anything just fill in the form below and send us.

Write a review

// Our Pipe //

Featured Pipe Products

HDPE butt fusion joint fittings
HDPE butt fusion joint fittings

High-Density Polyethylene (HDPE) fittings are components used in piping systems to connect, control,...

HDPE Ball Valves in Suriname
HDPE Ball Valves in Suriname

Are you looking for a reliable, durable, and cost-effective valve solution for your water and wastew...

Here are 5 Kinds of Electrofusion Pipe Fittings That Are Usually Used
Here are 5 Kinds of Electrofusion Pipe Fittings That Are Usually Used

Electrofusion fittings, also commonly known as electrofusion joints, are pipe fittings that allow fo...

All You Need to Know About 110 x 45° PE100 Elbow Connectors
All You Need to Know About 110 x 45° PE100 Elbow Connectors

Elbow connectors are used to connect one pipe or tube to another. They come in many different sizes,...

// Our Pipe //

New Fusion Machine

Hot Melt Plastic Welding Machine in Nepal
Hot Melt Plastic Welding Machine in Nepal

Plastic welding machines are becoming increasingly popular in Nepal due to the growing demand for du...

PPR Welder Machine in India Comprehensive Guide
PPR Welder Machine in India Comprehensive Guide

Are you searching for the perfect PPR welder machine to add to your workshop? Purchasing the right w...

Plastic pipe welding machine price in pakistan
Plastic pipe welding machine price in pakistan

If you are from Pakistan and are ready to understand the performance and price of Plastic pipe weldi...

Plumber butt fusion welding tools 2in' to 4in' machine price list
Plumber butt fusion welding tools 2in' to 4in' machine price list

The manual butt fusion welding machine is used to weld the inner and outer ends of galvanized pipes....

// Our Pipe //

New Pipe Products

Poly Pipe in Black/Blue Color for Water Supply
Poly Pipe in Black/Blue Color for Water Supply

Buy the best quality HDPE Pipe (Poly Pipe) In Black/Blue Color For Water Supply from Sunplast now. T...

HDPE SDR 11 2 inch Poly Pipe
HDPE SDR 11 2 inch Poly Pipe

HDPE SDR 11 2-inch poly pipe is a type of high-density polyethylene (HDPE) pipe commonly used in var...

PVC-U Water Supply Pipe
PVC-U Water Supply Pipe

As a mature water supply pipe material, rigid polyvinyl chloride (PVC-U) water supply pipe has the a...

HDPE Drainage Pipe Price List
HDPE Drainage Pipe Price List

HDPE Drainage Pipe is called high-density polyethylene double-wall corrugated pipe, referred to as H...