HDPE Electrofusion 90 degree elbow sizes and price list Nigeria

Electrofusion 90 degree elbow

In Nigeria, a electrofusion 90⁰ elbow is used to join two lengths of poly pipe on an angle of 90 degrees. Electrofusion elbow 90⁰ fittings are also used to join a long spigot fitting to a piece of pipe around a 90⁰ corner.

HDPE Electrofusion degree elbow

The elbow produced by high-density polyethylene is called HDPE elbow. Also called low pressure polyethylene elbow. These elbows in Nigeria are mainly used to connect the straight pipes on both sides of the turn.

Type of HDPE Electrofusion elbow

The types of pipe elbows in Nigeria are as follows: flexible elbows ferrule type elbows with side elbows quick-install elbows with seat elbows flange elbows 180° elbows double bearing elbows single bearing elbows socket elbows reducing diameters ElbowSeamless elbowButt welding elbow Grooved Elbow Stereo Elbow External Thread Elbow Thread Elbow Special Elbow Waterproof Elbow.

HDPE elbow for the gas pipeline

HDPE pipes have 45-degree and 90-degree elbows, and the actual pipeline may have different turning angles in Nigeria. HDPE pipe has its flexibility and can be bent and then straightened for use. During production, it can be bent and coiled into a coiled pipe of hundreds of meters. This is a normal bending situation, and it can be straightened when used. Yes, it is okay to have some bending in time. And using its bending characteristics, the PE pipe can be laid without excavation, which does not affect its performance, and of course it can be straightened. However, it is recommended that you do not press and bend too much, and generally do not bend more than 25 times the outer diameter. Gas is a general term for gaseous fuels, which can be burned to release heat for use by urban residents and industrial enterprises. There are many types of gas, mainly natural gas, artificial gas, liquefied petroleum gas and biogas, and coal-to-gas. Natural gas has obvious economical properties. The country pays more and more attention to environmental protection, and the market demand for clean energy continues to grow. As a clean, efficient and cheap energy, natural gas consumption has developed rapidly.

PE/HDPE pipeline

PE, polyethylene plastic, the most basic plastic, plastic bags, plastic wrap, etc. are all PE. HDPE is a highly crystalline, non-polar thermoplastic resin. The appearance of the original HDPE is milky white, and it is translucent to a certain extent in the thin section. PE has excellent resistance to most household and industrial chemicals.

PE pipe has medium density polyethylene pipe and high density polyethylene pipe. According to the wall thickness, it is divided into SDR11 and SDR17.6 series in Nigeria. The former is suitable for conveying gaseous artificial gas, natural gas and liquefied petroleum gas, while the latter is mainly used for conveying natural gas.

Compared with steel pipe, PE/HDPE pipe has low price, simple construction process, certain flexibility, and more importantly, it is not used for anti-corrosion treatment, which will save a lot of money and processes. The disadvantage is that the equipment is not as good as the steel pipe. During the construction in Nigeria, special attention is paid to the safety distance of the thermal heating, and it cannot be exposed to the sun in the air, and it is sensitive to chemicals to prevent the leakage of the sewage pipe from causing damage.

HDPE Electrofusion pipe fitting

An electrofusion pipe fitting is a plastic (polyethylene) pipe fitting that can be melted by the temperature generated by an electric current to achieve a connection. The capacity (that is, the amperage) is the main parameter. In some low-voltage circuits, the voltage requirements are not high, and only the amperage can be marked.

Electrofusion pipe fittings play an important and irreplaceable role in engineering and maintenance. Especially in construction in Nigeria, electrofusion pipe fittings are less affected by the external environment and human factors, so they have better reliability and are more popular with users. Especially in gas pipe engineering in Nigeria, electrofusion fittings are being used more and more. Due to the complex production technology, high cost and high sales price of HDPE electrofusion pipe fittings.

Electrofusion 90 Elbow sizes and price list in Nigeria

Here is a list about electrofusion 90 elbow sizes and price for customers in Nigeria. Since the market is changing, the price will change at any time. So this set of data is for reference only. If you need to purchase electrofusion 90 elbow, please feel free to contact us and we will provide you with the latest quotation.