Verification: 5ab891c0301f8557

PERT Electrofusion Pipe Fittings 90° Elbow

PERT Electrofusion Pipe Fittings 90° Elbow
PERT Electrofusion Pipe Fittings 90° Elbow
PERT Electrofusion Pipe Fittings 90° Elbow
PERT Electrofusion Pipe Fittings 90° Elbow
PERT Electrofusion Pipe Fittings 90° Elbow
Name
90° Elbow Electrofusion Pipe Fittings
Material
PP-R
Place of Origin
China
Colors
White
Payment items
T/T L/C
Port
Qingdao
Payment
30% ADVANCE PAYMENT AND THE 70% BALANCE PAYMENT BEFORE THE SHIPEMNT
HAILI PPR pipe line allows for twice pressure rating at higher temperatures and superior chlorine resistance. HAILI pipes and fittings - from 1/2 to 24 inches - are available in a wide range of fittings and joining methods to solve any installation problem.


pert-electrofusion-fitting (3).webp

ADVANTAGES OF OUR 90° ELBOW PERT ELECTROFUSION PIPE FITTINGS

1. NO CORROSION OR SCALING

Polypropylene is a poor conductor of electricity, so the NIRON system is cannot be affected by corrosion.

Furthermore, thanks to its smooth inner surface, any type of lime incrustation is avoided.

2. ENERGY SAVING        

The low thermal conductivity of polypropylene allows for considerable energy savings compared to metallic materials, and reduces insulation cost. The thermal conductivity of PPR pipe is 0.21w/mk, which is only 1/200 of that of steel pipe.

3. ABRASION RESISTANCE

The high resistance of HAILI pipes eliminates erosion problems and allows high speed water flow.

4. NO TOXICITY

The molecules of the raw material PPR include only carbon and hydrogen elements, and there contain no harmful and toxic elements. Our 90° elbow PPR electrofusion pipe fittings are absolutely non-toxic, hygienic and reliable, and fully comply with national and international hygiene standards. Our PPR electrofusion fittings can be used not only in hot and cold water pipes, but also in pure drinking water systems.

5. GOOD HEAT RESISTANCE.

The Vicat softening point of the PP-R pipe is 131.5 °C, and the working temperature can reach 95 °C, which can meet the use requirements of the hot water system in the building water supply and drainage code.

6. LONG LASTING.

The service life of PP-R pipe can reach more than 50 years under the condition of working temperature of 70℃ and working pressure of 1.0MPa; the service life of PP-R pipe can reach more than 100 years at normal temperature (20℃).

7. EASY INSTALLATION AND RELIABLE CONNECTION.

PP-R has good welding performance, pipes and fittings can be connected by hot melt and electrofusion, easy installation, reliable joints, and the strength of the connection part is greater than the strength of the pipe body.

8. MATERIALS CAN BE RECYCLED.

The PP-R waste is cleaned and crushed and then recycled for the production of pipes and fittings. The amount of recycled material does not exceed 10% of the total, which does not affect product quality.

APPLICATION OF THE 90° ELBOW PERT ELECTROFUSION PIPE FITTINGS

1. Cold and hot water systems of buildings, including central heating systems;

2. Heating systems in buildings, including floors, siding and radiant heating systems;

3. Direct drinking pure water supply system;

4. Central (centralized) air conditioning system;

5. Industrial pipeline systems such as transporting or discharging chemical media.


Send a Message

If you want to ask anything just fill in the form below and send us.

Name: alal Niazi        time:2022-08-24 09:53:48
I really like these 90° elbow electrofusion pipe fittings!

Write a review

// Our Pipe //

Featured Pipe Products

PE End Cap Electrofusion pipe fittings
PE End Cap Electrofusion pipe fittings

Electrofusion pipe fittings refer to a plastic (polyethylene) pipe fitting that can be melted by the...

Haili electrofusion tapping saddle tee fittings HDPE
Haili electrofusion tapping saddle tee fittings HDPE

Haili is a professional manufacturer of electrofusion tapping saddle products. The method of injecti...

PE100 electrofusion joint for water pipe fittings
PE100 electrofusion joint for water pipe fittings

The installation of electrofusion elbow pipe fittings can be generally divided into four steps, name...

HDPE Pipe Electrofusion Fittings Couplings PE100
HDPE Pipe Electrofusion Fittings Couplings PE100

Electrofusion pipe fittings are plastic (polyethylene) pipe fittings that can be melted by the tempe...

// Our Pipe //

New Fusion Machine

Hot Melt Plastic Welding Machine in Nepal
Hot Melt Plastic Welding Machine in Nepal

Plastic welding machines are becoming increasingly popular in Nepal due to the growing demand for du...

PPR Welder Machine in India Comprehensive Guide
PPR Welder Machine in India Comprehensive Guide

Are you searching for the perfect PPR welder machine to add to your workshop? Purchasing the right w...

Plastic pipe welding machine price in pakistan
Plastic pipe welding machine price in pakistan

If you are from Pakistan and are ready to understand the performance and price of Plastic pipe weldi...

Plumber butt fusion welding tools 2in' to 4in' machine price list
Plumber butt fusion welding tools 2in' to 4in' machine price list

The manual butt fusion welding machine is used to weld the inner and outer ends of galvanized pipes....

// Our Pipe //

New Pipe Products

2 inch plastic water pipe roll
2 inch plastic water pipe roll

A 2-inch plastic water pipe roll refers to a type of flexible tubing made from plastic, typically hi...

PERT Ⅱ Heat Resistant Insulation Pipe
PERT Ⅱ Heat Resistant Insulation Pipe

Polyurethane prefabricated directly buried insulation pipe, full name: high-density polyethylene out...

Underfloor Heating Pipes PERT Pipe
Underfloor Heating Pipes PERT Pipe

Underfloor Heating Pipes in stock at The Underfloor Heating Store. Multifunctional, reliable underfl...

HDPE Cross Pipe Fittings
HDPE Cross Pipe Fittings

To find the Versatility of HDPE Cross Pipe Fittings. Engineered for precise connections, these fitti...