Modified polypropylene (MPP) Electrical Conduit Pipe the Philippines

Modified polypropylene (MPP) Electrical Conduit Pipe

The modified polypropylene (MPP) electrical conduit pipe is a new type of plastic tube made of modified polypropylene through special formula and processing technology. The finished pipe of modified polypropylene (MPP) electrical conduit pipe is orange-red in color. MPP electrical conduit pipes are all straight pipes. It has the advantages of high strength, high temperature resistance, not easy to wear, tensile and compressive resistance, simple construction, cost saving, etc. It is widely used in the protection of power cables and communication cables in the Philippines, and is suitable for burial depths of 2-18m. The modified polypropylene (MPP) electrical conduit pipes we produce are generally 6 meters each, and the length of the pipes can be customized according to customer needs.

Classification of Modified polypropylene (MPP) Electrical Conduit Pipes

Modified polypropylene (MPP) Electrical Conduit Pipes are divided into ordinary type and reinforced type, and reinforced type is divided into excavated pipe and non-excavated pipe. The so-called MPP non-excavated pipe is also called MPP jacking pipe, MPP pulling pipe, and MPP traction pipe. The ordinary type is suitable for excavation and paving construction and trenchless crossing construction projects with a buried depth of less than 4M; the enhanced type is suitable for projects with a trenchless crossing construction buried depth greater than 4M. Trenchless technology can ensure the reliability of the pipeline network and reduce the failure rate of the pipeline network. Trenchless construction is more in line with the development needs of modern cities in the Philippines. It has the characteristics of no pollution to the environment, no impact on traffic, little damage to the stratum structure, short cycle and low cost, and is widely used in the Philippines.

Advantages of Modified polypropylene (MPP) Electrical Conduit Pipes

1. MPP power tube is resistant to high temperature, external pressure and electrical insulation

Modified polypropylene (MPP) Electrical Conduit Pipe can withstand -5-90°C, and its tensile and compressive properties are higher than HDPE, especially suitable for the construction of high-voltage wires and cables above 10KV.

2. MPP power tube is light in weight and has small frictional resistance

Modified polypropylene (MPP) Electrical Conduit Pipe does not need to be excavated for construction, smooth and easy to construct, and the flexible joints are hot-melt welded, with high strength and super-long and high-traction hosting.

3. MPP power tube has good toughness

Modified polypropylene (MPP) Electrical Conduit Pipe has excellent anti-subsidence and anti-seismic performance. Commonly used pipes are divided into reinforced type and ordinary type. The enhanced type is suitable for projects with non-development crossing construction with a buried depth greater than 4m. Ordinary and vice versa.

It is precisely because Modified polypropylene (MPP) Electrical Conduit Pipes have so many characteristics and advantages that they are generally accepted by Filipinos and used in many fields. We produce Modified polypropylene (MPP) Electrical Conduit Pipes with high quality and low price, which has a competitive advantage in the Philippine market. Acting our Modified polypropylene (MPP) Electrical Conduit Pipe products in the Philippines is a very good business with good prospects. If you are interested in our products, please contact us for consultation.

Application field of Modified polypropylene (MPP) Electrical Conduit Pipes

1. Modified polypropylene (MPP) Electrical Conduit Pipe used for Power cable engineering

Urban and rural non-excavation horizontal directional drilling cable piping projects, and open-cut cable piping projects.

2. Modified polypropylene (MPP) Electrical Conduit Pipe used for Drainage and sewage works

Urban and rural non-excavation horizontal directional drilling drainage projects; industrial wastewater discharge projects.

The application field of Modified polypropylene (MPP) Electrical Conduit Pipe is very broad, and the demand for it in the Philippines is also quite large. And under the same price, our product quality is higher than other similar products; under the same quality, our price is competitive; our product reputation in the Philippines is getting better and better, and the sales volume is also increasing.

Transportation of Modified polypropylene (MPP) Electrical Conduit Pipes

1. When transporting, loading, unloading and transferring Modified polypropylene (MPP) Electrical Conduit Pipes, care should be taken to handle them with care. Throwing, rolling and dragging along the ground are not allowed to avoid violent impact.

2. The Modified polypropylene (MPP) Electrical Conduit Pipe should be protected by soft material Gree at the contact point with the cable, and the use of metal ropes for hoisting is prohibited.

3. During the transportation of Modified polypropylene (MPP) Electrical Conduit Pipes, the pipes need to be fixed and bundled so as not to loosen and slide, to avoid mutual collisions, causing damage to the outer wall of the pipes, and there should be no sharp objects around the pipes to reduce the possibility of pipe damage.

4. It cannot be transported together with corrosive substances. Contact with corrosive substances will cause deformation of the Modified polypropylene (MPP) Electrical Conduit Pipe, damage the straightness of the pipe, and affect the construction quality.

5. Both ends of the Modified polypropylene (MPP) Electrical Conduit Pipe need to be blocked during transportation to avoid foreign matter entering during transportation, scratching the inner wall of the pipe, causing damage to the electrical coating inside the pipe, and reducing the electrical insulation, which will affect the stable operation of the power system in the later stage and cause safety hazards. Hidden danger.

6. During the transportation of Modified polypropylene (MPP) Electrical Conduit Pipes, take measures to prevent rain. Long-term immersion in rainwater will affect the service life of Modified polypropylene (MPP) Electrical Conduit Pipes.

7. The number of stacking layers during transportation should not be too high, and the pipeline below cannot withstand long-term pressure, which will cause damage to the structure of the Modified polypropylene (MPP) Electrical Conduit Pipe.

8. The transportation vehicle of Modified polypropylene (MPP) Electrical Conduit Pipe must meet the standards, and the pipe should not exceed the body, and cannot be super wide or super high, so as to ensure the safety of driving and pipes.

A good transportation environment is the basic condition to ensure the quality and performance of Modified polypropylene (MPP) Electrical Conduit Pipes. We must pay attention to the above matters when transporting Modified polypropylene (MPP) Electrical Conduit Pipes to ensure that the Modified polypropylene (MPP) Electrical Conduit Pipes are delivered to the destination safely and undamaged. If you order our products in the Philippines, we will find a professional transportation company to ensure the safe and fast delivery of the products.

Storage of Modified polypropylene (MPP) Electrical Conduit Pipes

Whether it is Modified polypropylene (MPP) Electrical Conduit Pipe or any other type of pipeline, it must be stored in strict accordance with its relevant regulations during storage, so as to better ensure that the pipeline can get a good storage effect. The following are the matters needing attention in the storage of MPP power tubes.

1. Modified polypropylene (MPP) Electrical Conduit Pipes should be protected against theft, fire, freezing, moisture and corrosion, and should always be ventilated.

2. Explosive, flammable and corrosive substances should be stored separately or separately and checked regularly.

3. The stored materials should be classified and placed according to the materials, specifications and functions of different products, so as to be complete, stable, with complete material labels and obvious signs.

4. Fine and fragile equipment and materials should be handled with care and kept properly. Squeezing and inversion are strictly prohibited.

5. When Modified polypropylene (MPP) Electrical Conduit Pipe materials are put into storage, the custodian must check the specifications, models, quantities, etc. Inspect the incoming materials according to the purchase list, purchase list and inspection certificate to ensure accuracy and quality. If there is a discrepancy, the storage procedures cannot be handled.

Therefore, when storing MPP power tubes, we must pay attention to whether they meet the relevant requirements of the storage system, and regularly check the storage status of the tubes so that the MPP power tubes will not be damaged by any factors during long-term storage. Our storage conditions fully meet the requirements, and there will be absolutely no product defects caused by improper storage; we will also check each pipeline before delivery to ensure the quality of each pipeline, so that our Philippine customers receive The product is absolutely qualified.

The above is the relevant knowledge about MPP electric conduit pipe Philippines that we share with you as an MPP electric pipe manufacturer. If you have other questions or are interested in our products, you can follow us. Feel free to contact us anytime.