Outdoor underground water pipe Saudi Arabia

HAILI Pipe
Feb/15/2023
Outdoor underground water pipe Saudi Arabia
In Saudi Arabia, outdoor underground water pipes generally use ductile iron pipes or HDPE pipes. Among them, HDPE pipe is a relatively popular water pipe material in recent years. It has obvious advantages in terms of use effect and cost, so the proportion of HDPE water pipes is increasing.

Outdoor underground water pipe in Saudi Arabia is regulated by the Ministry of Water and Electricity (MOWE). According to the MOWE’s regulations, underground water pipes must be laid at least 1.5 meters below the ground surface. The pipes must be made from HDPE material and must have a diameter of at least 50 millimeters. The pipes must also be laid in a straight line and at a maximum depth of two meters. The installation of the pipe must follow the local and regional codes and should be done by a licensed professional. Additionally, the pipes must be tested and certified by a licensed plumber or technician prior to installation.

What material is generally used for outdoor underground water pipes?

In Saudi Arabia, outdoor underground water pipes generally use ductile iron pipes or HDPE pipes. The following are their respective characteristics.

Ductile iron pipe

Ductile iron pipes are made of molten iron, which has a relatively high melting point, consumes a large amount of energy for processing, is relatively large in size, and is inconvenient for transportation. In addition, the surface of the ductile iron pipe is relatively rough, resulting in relatively large water resistance. Note that after using this type of water pipe for 1 to 3 years, it is easy to cause the pH value of the water to rise, and the water will be affected to some extent.

HDPE pipe

The melting point required for HDPE pipes is relatively low, and the energy consumption required for processing and molding is relatively small. The smoothness of the inner wall of the pipe is high, the water flow resistance generated is small, and the energy saving effect is also good. In addition, HDPE material is non-toxic and harmless, and does not react with water.

It can be seen from the above characteristics of ductile iron pipes and HDPE pipes that HDPE pipes have obvious advantages. This is also the reason why more HDPE pipes are used in outdoor underground water pipes in Saudi Arabia.

What should be paid attention to in the construction of outdoor underground water pipes?

1. For water pipes buried in the ground, the outdoor part must reach below the freezing depth. For the indoor part, the burial depth should be determined according to the diameter of the water pipe. For example, if the diameter is 15 to 50mm, then the depth needs to be about 0.45m. And if it is directly 65 to 80mm, it needs to be buried about 0.6m.

2. When installing water pipes, it is also necessary to pay attention that the water supply pipes must be above the drain pipes and at the same level, and the distance between the water pipes should be controlled at more than 2m. If the trench is laid, the water supply pipe should be under the functional pipe or on the other side.

3. When installing each pipeline, it is necessary to have a bracket for fixing work. If the standpipe is a steel pipe, the storey height must be controlled within 5m, and pipe clamps need to be set up on each floor.

Outdoor underground water pipes must be constructed in strict accordance with the requirements to ensure safe and normal use. In addition to paying attention to the above matters during construction, our Saudi Arabian customers must also abide by local policies and regulations.

Packaging of outdoor underground water pipes

The packaging method of our outdoor underground water pipes is basically in accordance with the requirements of the ordering party. Most of the pipes are not packed, and the pipe fittings are made of large cartons with small paper boxes or small plastic bags. If customers in Saudi Arabia have special packaging requirements, we will try our best to meet them.

Transportation methods of outdoor underground water pipes

Outdoor underground water pipes are generally transported by road, rail and sea. Because the pipe fittings are relatively large, it is generally not shipped by air, unless there is a small urgent shipment. In general, we will communicate with our Saudi Arabian customers which shipping method to use. We will respect the opinions and suggestions of customers.

Precautions when transporting HDPE outdoor underground water pipes

1. HDPE pipes should not be rolled on hard uneven ground or gravel ground for short-distance transportation to prevent damage to the pipe.

2. When the inner diameter of HDPE pipes is greater than 1000mm, it is not suitable to be stacked for transportation. If small-diameter pipes are stacked for transportation, the HDPE pipes should be kept stable, and gaps should be left between the pipes to prevent the pipes from sliding.

3. When HDPE pipes are stacked for transportation, their height should not exceed 2 meters. Where vehicles and boats are in contact with pipelines, it is required to be flat and fixed to the means of transport with flexible belts or ropes to prevent rolling and collisions.

4. If the inner diameter of HDPE pipe is greater than or equal to 1000mm, a support ring should be added for transportation. When the inner diameter is greater than 2000mm, a support ring must be added.

Precautions when storing HDPE outdoor underground water pipes

1. When the HDPE outdoor underground water pipe is placed directly on the ground, the ground is required to be flat, without stones and sharp objects that are likely to cause damage to the pipe, and measures to prevent the pipe from rolling are required.

2. When stacking HDPE outdoor underground water pipes with different pipe diameters, the large and heavy ones should be put down, and the light ones should be placed on the top. The two sides of the pipes should be blocked by wooden wedges or planks. When placing them, pay attention to the load-bearing capacity of the bottom pipes, and the stacking height should not exceed 2.4m. , the deformation shall not be greater than 6%.

3. The maximum operating temperature of HDPE outdoor underground water pipes is 45 degrees Celsius, which is high temperature in summer. Sun exposure should be avoided, and air circulation between the pipes should be kept to prevent temperature rise.

4. During the storage of HDPE outdoor underground water pipes, waterproof measures should be strictly taken, and the sockets should be kept clean.

5. It is strictly forbidden to have long-term open flames near the pipeline.

We are a professional supplier of outdoor underground HDPE water pipes, and our workers involved in the transportation and storage of products are very experienced workers. We ensure that the HDPE water pipe will not be damaged during transportation and storage, and 100% protect its performance. Here we also remind customers in Saudi Arabia to be careful during transportation and storage.

If you need to buy HDPE pipe or have any questions about it, please feel free to contact us.

 



Send a Message

If you want to ask anything just fill in the form below and send us.

// News //

Our News

HDPE Plastic Pipe Manufacturers
HDPE Plastic Pipe Manufacturers

04/29/2024

HDPE (High-Density Polyethylene) plastic pipes have gained prominence in various industries and infr...

HDPE Pipe in Thailand
HDPE Pipe in Thailand

04/12/2024

High-Density Polyethylene (HDPE) pipes have emerged as a versatile and reliable solution for various...

Large Diameter HDPE Pipe
Large Diameter HDPE Pipe

03/29/2024

This article will summarize the perception issues related to large-diameter HDPE pipe as well as rec...

PPH Flat Flange
PPH Flat Flange

03/21/2024

In piping systems in industry and construction, the selection of connections is crucial. PPH (polypr...

HDPE pipes and welding machines
HDPE pipes and welding machines

03/12/2024

HDPE pipes and welding machines are key tools for pipe connection, and together they form an importa...

HDPE Silicone Core Pipe
HDPE Silicone Core Pipe

03/07/2024

In modern industrial and municipal engineering, pipeline systems play a vital role in transporting v...

// Our Products //

New Products

2 inch plastic water pipe roll
2 inch plastic water pipe roll

A 2-inch plastic water pipe roll refers to a type of flexible tubing made from plastic, typically hi...

PERT Ⅱ Heat Resistant Insulation Pipe
PERT Ⅱ Heat Resistant Insulation Pipe

Polyurethane prefabricated directly buried insulation pipe, full name: high-density polyethylene out...

Underfloor Heating Pipes PERT Pipe
Underfloor Heating Pipes PERT Pipe

Underfloor Heating Pipes in stock at The Underfloor Heating Store. Multifunctional, reliable underfl...

HDPE Cross Pipe Fittings
HDPE Cross Pipe Fittings

To find the Versatility of HDPE Cross Pipe Fittings. Engineered for precise connections, these fitti...

HDPE butt fusion joint fittings
HDPE butt fusion joint fittings

High-Density Polyethylene (HDPE) fittings are components used in piping systems to connect, control,...

PERT Ⅱ Electrofusion Pipe Fitting
PERT Ⅱ Electrofusion Pipe Fitting

Pert-2 fittings represent a cutting-edge solution in the field of plumbing and heating systems. Thes...

PE Pipe Fittings Electrofusion EF HDPE fittings
PE Pipe Fittings Electrofusion EF HDPE fittings

​Discover premium HDPE electrofusion fittings at Haili Pipe Company. With over a decade of expertise...

300mm corrugated pipe for industrial ventilation
300mm corrugated pipe for industrial ventilation

Industrial ventilation plays a vital role in maintaining air quality, controlling temperature, and e...